Gardasoft RT Series

RT200-20
Gardasoft - Industrial LED TechnologyRT200-20RT420F-20RT820F-20

Gardasoft RT Series

The RT range is Gardasoft’s latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT controller range offering two/four output channels which are independently controlled.

Product Details

Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The ‘F’ version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger.

The RT220 / RT260 / RT420 / RT460 models can be quickly configured using our free software (which can be downloaded from this page), or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT200 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected.

Using our patented SafeSense™ technology, the RT200 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT200 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage (which you need to do with the Gardasoft PP range), making implementation and system integration much simpler). Gardasoft Controllers are universally compatible with LED Vision lighting from manufacturers. The Gardasoft White Paper on LED Controller technology is a useful reference for the principles of attaining maximum performance for Machine Vision illumination.

MAXIMUM CURRENT RATING Timing (μS) LED Safety Easy Intergration Interfacing
Model No. of
Channels
Continuous
(A)
Pulsed
(A)
Resolution (mA) Minimum Pulse
Width Timing
SafeSense™ SafePower™ P-Button Ethernet RS232
RT200-20 2 3 20 5 20
RT200F-20 2 3 20 5 1
RT220-20 2 3 20 5 20
RT220F-20 2 3 20 5 1
RT260-20 2 3 20 5 20
RT260F-20 2 3 20 5 1
RT420-20 4 3 20 5 20
RT420F-20 4 3 20 5 1
RT460-20 4 3 20 5 20
RT460F-20 4 3 20 5 1
RT820F-2 8 3 2 1 1
RT820F-20 8 3 20 5 1
RT860F-2 8 3 2 1 1
RT860F-20 8 3 20 5 1

 

JM Vistec System is the Authorized Distributor for Gardasoft Vision.

Reviews

There are no reviews yet.

Be the first to review “Gardasoft RT Series”

Documentation and support

Product Details

Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The ‘F’ version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger.

The RT220 / RT260 / RT420 / RT460 models can be quickly configured using our free software (which can be downloaded from this page), or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT200 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected.

Using our patented SafeSense™ technology, the RT200 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT200 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage (which you need to do with the Gardasoft PP range), making implementation and system integration much simpler). Gardasoft Controllers are universally compatible with LED Vision lighting from manufacturers. The Gardasoft White Paper on LED Controller technology is a useful reference for the principles of attaining maximum performance for Machine Vision illumination.

MAXIMUM CURRENT RATING Timing (μS) LED Safety Easy Intergration Interfacing
Model No. of
Channels
Continuous
(A)
Pulsed
(A)
Resolution (mA) Minimum Pulse
Width Timing
SafeSense™ SafePower™ P-Button Ethernet RS232
RT200-20 2 3 20 5 20
RT200F-20 2 3 20 5 1
RT220-20 2 3 20 5 20
RT220F-20 2 3 20 5 1
RT260-20 2 3 20 5 20
RT260F-20 2 3 20 5 1
RT420-20 4 3 20 5 20
RT420F-20 4 3 20 5 1
RT460-20 4 3 20 5 20
RT460F-20 4 3 20 5 1
RT820F-2 8 3 2 1 1
RT820F-20 8 3 20 5 1
RT860F-2 8 3 2 1 1
RT860F-20 8 3 20 5 1

 

JM Vistec System is the Authorized Distributor for Gardasoft Vision.

Reviews

There are no reviews yet.

Be the first to review “Gardasoft RT Series”

Enquire Now