[ SVL ] EZ Mount LED Ring Lights

Smart Vision Lights
ez-mount-rign-light-r130ez-mount-rign-light-odr130

[ SVL ] EZ Mount LED Ring Lights

SmartVisionLights

 

 

 

The EZ Mount LED Ring Light are a high output LED light in an aluminum housing. Housing uses industry standard T-Slots
for ease of mounting. Ring Lights are available in light output of White, Red, Amber, Blue, Green, Cyan, IR and UV. Ring Light includes
an integrated constant current driver with a built in strobe input with option for PNP or NPN trigger control. No need for an external
driver to control the light. The integrated driver also includes variable light intensity control. Light can be controlled by a manual
potentiometer or a 0-10VDC analog signal.

Product Details

Type Features

EZ Mount LED Ring Light

Ring Light mounts directly to all models of CCTV lenses
Adapter Rings for all lens sizes
Can also be mounted by T-Slot with T-nut
High Output LED’s housed in small industrial housing
Built in smart driver with NPN & PNP control
Intensity control by analog 0-10VDC or integrated pot
Industrial Standard M12 style quick disconnect

 

The EZ Mount LED Ring Light can be quickly and easily adapted to any vision system with either of four standard mounting options.
First, there is a standard M46 thread protruding from the back of the EZ Mount LED Ring Light. Using readily available step-up or
step-down rings it can be mounted directly to the threads found on the front end of most lenses. Second is the ability to mount
the lens at the front end of the EZ Mount LED Ring Light. Once again, an off-the-shelf step up or step down adapter ring can
be used to adapt lenses with M43 or smaller filter mounting threads. A flange at the front end of the EZ Mount LED Ring Light holds
the step ring with three set screws, and the camera lens is inserted through the center of the EZ Mount LED Ring Light and threaded
onto the step ring. In those few cases where the lens’s locking thumbscrews may prevent the lens from fitting through the center of
the EZ Mount LED Ring Light, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed.
Step up and Step down adapter rings are not included with the light. Third is a T-slot on all sides. Standard industrial T-nuts can
be dropped into the slot for mounting. Fourth way to mount the light is using the threaded M4 holes on the back plate of light.

More Information

Reviews

There are no reviews yet.

Be the first to review “[ SVL ] EZ Mount LED Ring Lights”

Documentation and support

Product Details

Type Features

EZ Mount LED Ring Light

Ring Light mounts directly to all models of CCTV lenses
Adapter Rings for all lens sizes
Can also be mounted by T-Slot with T-nut
High Output LED’s housed in small industrial housing
Built in smart driver with NPN & PNP control
Intensity control by analog 0-10VDC or integrated pot
Industrial Standard M12 style quick disconnect

 

The EZ Mount LED Ring Light can be quickly and easily adapted to any vision system with either of four standard mounting options.
First, there is a standard M46 thread protruding from the back of the EZ Mount LED Ring Light. Using readily available step-up or
step-down rings it can be mounted directly to the threads found on the front end of most lenses. Second is the ability to mount
the lens at the front end of the EZ Mount LED Ring Light. Once again, an off-the-shelf step up or step down adapter ring can
be used to adapt lenses with M43 or smaller filter mounting threads. A flange at the front end of the EZ Mount LED Ring Light holds
the step ring with three set screws, and the camera lens is inserted through the center of the EZ Mount LED Ring Light and threaded
onto the step ring. In those few cases where the lens’s locking thumbscrews may prevent the lens from fitting through the center of
the EZ Mount LED Ring Light, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed.
Step up and Step down adapter rings are not included with the light. Third is a T-slot on all sides. Standard industrial T-nuts can
be dropped into the slot for mounting. Fourth way to mount the light is using the threaded M4 holes on the back plate of light.

More Information

Reviews

There are no reviews yet.

Be the first to review “[ SVL ] EZ Mount LED Ring Lights”

Enquire Now