The LCHPX is a low-cost, high-powered line scan light capable of over 800,000 lux. Fan-free passive cooling means less maintenance and fewer issues. Multiple lens configurations optimize illumination for your working distance. The LCHPX is fully enclosed and can be mounted using standard T-slot mounting hardware.
High power, low cost, with just the features you need.
Lens Position
Use the table below to determine the best lens position for your application.
| Lens Position | Working Distance (mm) | Beam Width (mm) | Illuminance (Lux) Values |
|---|---|---|---|
| 1 | 35 | 2.5 | 805,000 |
| 2 | 50 | 3 | 644,000 |
| 3 | 100 | 4.5 | 290,000 |
| 4 | 100 | 8 | 274,000 |
| Illumination measurement taken on white light, 5700 K | |||
| Product Details | |
| Illumination Type | Bright Field, Projector |
| IP Rating | IP50 |
| Size | 300 mm / 600 mm / 900 mm /1200 mm |
| Wavelength | WHI - White / 365 - UV / 395 - UV / 470 - Blue / 625 - Red / 850 - IR |
| Lens Position | 1 / 2 (Factory Default) / 3 /4 |
The modular design of the ODLX150 linear light, part of the Direct Connect Linear Light Series, offers integrated light-to-light connectors, eliminating the need for cable connectors to string lights together. The light operates in OverDrive™ strobe-only mode. This innovative design requires a power connection to the first light but eliminates the need for jumper cables to pass power through to the next, enabling tailored-length solutions in increments of 150 mm. Direct connect up to sixteen ODLX150 together.
The LM45 compact linear light features an integrated Multi-Drive™ constant-current driver that operates in continuous operation or in OverDrive™ strobe mode depending on the wiring method. The light can be mounted via a rear T-slot channel, also offers over-current protection and PNP and NPN strobe trigger inputs. With housing 51 mm long, the LM45 puts out unprecedented levels of light in one of the industry’s smallest footprints.
The LWB300 series features a 100% waterproof stainless-steel enclosure specially designed for the food industry and washdown environments where water and harsh detergents are present. The LWB300 features an integrated constant current driver built into the light and runs in continuous operation. NPN or PNP trigger signal input can be used to control the turning on/off input of the light. The intensity of the light can be controlled via a 1-10VDC analog signal line or onboard manual potentiometer. Daisy-chain up to six LWB300 together.
The modular design of the LX150 linear light, part of the Direct Connect Linear Light Series, offers integrated light-to-light connectors, eliminating the need for cable connectors to string lights together. The light operates in continuous operation. This innovative design requires a power connection to the first light but eliminates the need for jumper cables to pass power through to the next, enabling tailored-length solutions in increments of 150 mm. Direct connect up to sixteen LX150 together.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
