The RC range is Gardasoft’s latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the needs of perhaps having to use a bespoke DC power supply or heat sinking the controller. All RC models also include our SafeSense™ technology. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft RC Series controllers are therefore single channel current source devices.
| Parameter | RC100 | RC120 |
| User interface | Push-button | Ethernet and Push-button |
| Output channels | One constant current output with SafeSense™ | |
| Output current | Up to 1.0A continuous or 1.0A pulsed | Up to 1.2A continuous or 2.0A pulsed |
| Output Power | Max 25W | |
| Trigger inputs | Smart input compatible with 3V-24V, TTL, NPN, and PNP Input impedance (nominal): 50kohm | |
| Pulse Timing | From 100µs to 100ms in steps of 100µs | |
| Delay from trigger to pulse | From 2µs to 100ms in steps of 100µs | |
| Timing repeatability (Delay) | ±5µs (Delay + Pulse up to 60ms) Otherwise ±50µs | |
| Timing repeatability (Pulse width) | ±0.1µs (Delay + Pulse up to 1ms) ±5µs (Delay + Pulse from >1ms to 60ms) Otherwise ±50µs | |
| Switch mode latency | Maximum 100µs | |
| Trigger rate | Maximum 100Hz | |
| Output voltage | 0V to 32V | |
| Supply voltage | Regulated 24V ±10% A SELV power supply is required | |
| Dimensions | 101mm long by 35mm wide by 120mm high (excluding DIN fixing) | |
| Weight | 175g | |
| Mounting | DIN rail mount as standard | |
| Operating temperature | 5 to 50°C | |
| Humidity | Up to 95% non-condensing | |
The Gardasoft TR-HT series are industry’s highest power controllers for Machine Vision LED lighting; at 150W per channel, they are the perfect partner for driving high power LED Area and LED Bar lights.
OLED panels have many benefits in machine vision applications because they give an exceptionally stable and uniform light intensity across the width of the panel. They are also very thin and can be moulded into complex shapes. However, OLED lights are challenging to control because the physical properties inherent in OLED panels demand sophisticated drive techniques to obtain fast and accurate pulsing.
The PP1600 models can be quickly configured using our free software which can be downloaded from this page, or for the PP1620 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP1600 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
