This kit has a mounting plate for the Cognex Dataman 100/200/500, Insight Micro, 4G, 4GX, and Checker 200. Also includes a Tee link to add a light or additional camera. Includes (1) AFSB-520XS-CDMIC plate (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-2XS 2” link (1) AFSB-3XST tee Link.
This kit has a mounting plate for Baumer sensors CS100, ID100, ID110, XC100, XC200, XF100, and XF200. Includes (1) AFSB-580-B-VS plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-4XS 4” link.
The 3/16 T-Handle wrench is used on the standard series to mount the AFSB-1 Ball Base to all of the standard series plates.
This kit has the mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series. Also includes a Tee link to add a light or additional camera. Includes (1) AFSB-521-C-DI plate, (3) AFSB1 bases, (1) AFSB-290 knuckle, (1) AFSB-3T Tee Link, (4) AFSB-2 knuckles, (2) AFSB-3-2 2” Links.
The AFSB-CLAMP HANDLE kit can be used in the standard and XS series knuckles (AFSB-2, AFSB290, AFSB-2XS, AFSB-2XS90, and the AFSB-2-2XS coupler) to make quick adjustments in the positioning of the arms. Remove one of the screws of the knuckle and add the spacer and handle. Once the position is set, tighten the remaining screws. The handle and spacer can then be removed and the original screw can be re-inserted, or the handle can be left on the knuckle.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
