This kit includes everything needed to add vacuum to our standard series products. Directly thread in any vacuum cup with a G1/2 fitting or use one of the included adaptors for G3/8 or G1/4 fittings. The supply hose routes back through the knuckles, links, and bases for a clean and reliable solution with no exposed hoses. We also include a special adaptor for mounting decentralized vacuum grippers that have an M8 stud. The side port allows the pressure supply to run internally and the only exposed hose is at the gripper.
This kit has a mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series. Includes (1) AFSB-521-C-DI plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
The 5/32 T-Handle wrench is use for the screws in all of the knuckles in both the standard series and XS series (AFSB-2, AFSB-290, AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS) as well as the AFSB-1XS Ball Base mounting to the XS series mounting plates.
This single arm Standard Series kit with an 8” link is ready to mount any standard series mounting plate. This kit includes: (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-8 link, and (1) AFSB-Clamp Handle.
This kit has a mounting plate for the Cognex Dataman 300 and the Cognex insight 7000 series. Also includes a Tee link to add a light or additional camera. Includes (1) AFSB-521-C-DI plate, (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (1) AFSB-3XST tee link, (2) AFSB-3-2XS 2” links.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
