Xenics Short-Wave Infrared (SWIR) XSW 320 Series

The XSW 320 series is based on an in-house developed, temperature stabilised InGaAs detector with a 320 x 256 pixel resolution.

The XSW 320 camera modules are offered with frame rates of up to 400 Hz.

The camera modules come with either a CameraLink, GigE Vision or QTE Samtec interface and features low weight and power.

Benefits & Features
• Flexible and easy-to-use
• CameraLink, GigE Vision, QTE Samtec interfacing options
• Low dark current
• Small SWIR area-scan camera module

Add to Proposal

Mechanical Specifications:

	XSW 320 CL 100 / 400	XSW 320 GigE 100 / 400	XSW 320 16bitDV 100 / 400
Approximate dimensions - excluding lens [width x height x length] [mm]	45 x 45 x 56	45 x 45 x 65	45 x 45 x 52
Weight [gr] - excluding lens	129	165	122
Optical interface [optional]	C-mount or M42	C-mount or M42	C-mount or M42
Connector GigE	-	RJ-45	-
Connector CameraLink	Standard SDR	-	-
Connector power	Hirose HR10-7R-SA[73]	Hirose HR10-7R-SA[73]	-
Connector trigger	SMA	SMA	-
Connector general I/O	-	-	QTE-020-03-L-D-A Samtec

Environmental & Power Specifications:

	XSW 320 CL 100 / 400	XSW 320 GigE 100 / 400	XSW 320 16bitDV 100 / 400
Operating case temperature [°C]	From -40 to +70; also available in temperature range 0 - 50	From -40 to +70; also available in temperature range 0 - 50	From -40 to +70; also available in temperature range 0 - 50
Storage temperature [°C]	From -45 to +85	From -45 to +85	From -45 to +85
Power consumption [W]	2.8 [no TE cooler]	4 [no TE cooler]	2.5 [no TE cooler]
Power supply voltage	DC 12 V	DC 12 V	DC 12 V
Shock	IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms]	IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms]	IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms]
Vibration	Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz]	Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz]	Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz]
Regulatory compliance	RoHS	RoHS	RoHS

Electro-Optical Specifications:

	XSW 320 CL 100 / 400	XSW 320 GigE 100 / 400	XSW 320 16bitDV 100 / 400
Image format [pixels]	320 x 256	320 x 256	320 x 256
Pixel pitch [µm]	20	20	20
Detector type	InGaAs photodiode array with CTIA ROIC	InGaAs photodiode array with CTIA ROIC	InGaAs photodiode array with CTIA ROIC
Sensor temperature stabilization	TE cooler	TE cooler	TE cooler
Integration type	Snapshot - global shutter	Snapshot - global shutter	Snapshot - global shutter
Active area and diagonal [mm]	6.4 x 5.12 [diagonal 8.2]	6.4 x 5.12 [diagonal 8.2]	6.4 x 5.12 [diagonal 8.2]
Optical fill factor	100%	100%	100%
Spectral range [nm]	900 - 1700	900 - 1700	900 - 1700
Quantum efficiency	~80% [typical peak value]	~80% [typical peak value]	~80% [typical peak value]
Gain modes	Single Gain	Single Gain	Single Gain
Full well capacities [electrons]	70k	70k	70k
Read noise [electrons]	110	110	110
Dark current [electrons/second]	<100k [at 288K sensor temp and 150 mV reverse bias]	<100k [at 288K sensor temp and 150 mV reverse bias]	<100k [at 288K sensor temp and 150 mV reverse bias]
Read out mode	ITR	ITR	ITR
Pixel operability	>99%	>99%	>99%
Preconfigured exposure time range [ms]	0.5 to 10 for 100 Hz; 0.01 to 40 for 400 Hz	0.5 to 10 for 100 Hz; 0.01 to 40 for 400 Hz	0.5 to 10 for 100 Hz; 0.01 to 40 for 400 Hz
Max frame rate [Hz] (full frame)	100 or 400	100 or 400	100 or 400
Region of interest	Yes [only for 400 Hz model]	Yes [only for 400 Hz model]	Yes [only for 400 Hz model]
Min region size [pixels]	32 x 4 [step 4 x 1] [only for 400 Hz model]	32 x 4 [step 4 x 1] [only for 400 Hz model]	32 x 4 [step 4 x 1] [only for 400 Hz model]
Max frame rate [Hz] [min region size]	>10000 [only for 400 Hz model]	>10000 [only for 400 Hz model]	>10000 [only for 400 Hz model]
Analog-to-Digital (ADC) [bits]	14	14	14
Command and control	CameraLink	GigE Vision	QTE Samtec
Digital output format	CameraLink [16 bit]	GigE Vision [16 bit]	Digital Video [16 bit ]
Trigger	In or out via SMA or in via CL-CC1 [Configurable]	In or out via SMA [Configurable]	In or out via QTE Samtec [Configurable]