Xenics Short-Wave Infrared (SWIR) XSW Gated Series

The XSW 320 Gated series is based on in-house developed, temperature stabilised InGaAs detector with a 320 x 256 pixel resolution.

The XSW 320 Gated modules are able to provide maximum frame rates up to 400 Hz. The exposure time of the sensor is configurable from 100 ns up to 1 ms in steps of 100 ns, or from 1 ms to 40 ms.

The module comes with either CameraLink, GigE Vision or QTE Samtec interface.

Benefits & Features
• Extremely short 100 ns integration time
• CameraLink, GigE Vision and QTE Samtec interfacing options
• Small SWIR area-scan module

Add to Proposal

Mechanical Specifications:

	XSW 320 CL Gated	XSW 320 GigE Gated	XSW 320 16bitDV Gated
Approximate dimensions - excluding lens [width x height x length] [mm]	45 x 45 x 56	45 x 45 x 65	45 x 45 x 52
Weight [gr] - excluding lens	129	165	122
Optical interface [optional]	C-mount or M42	C-mount or M42	C-mount or M42
Connector GigE	-	RJ-45	-
Connector CameraLink	Standard SDR	-	-
Connector power	Hirose HR10-7R-SA(73)	Hirose HR10-7R-SA(73)	-
Connector trigger	SMA	SMA	-
Connector general I/O	-	-	QTE-020-03-L-D-A Samtec

Environmental & Power Specifications:

	XSW 320 CL Gated	XSW 320 GigE Gated	XSW 320 16bitDV Gated
Operating case temperature [°C]	From -40 to +70; also available in temperature range 0 - 50	From -40 to +70; also available in temperature range 0 - 50	From -40 to +70; also available in temperature range 0 - 50
Storage temperature [°C]	From -45 to +85	From -45 to +85	From -45 to +85
Power consumption [W]	2.8 [no TE cooler]	4 [no TE cooler]	2.5 [no TE cooler]
Power supply voltage	DC 12 V	DC 12 V	DC 12 V
Shock	IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms]	IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms]	IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms]
Vibration	Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz]	Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz]	Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz]
Regulatory compliance	RoHS	RoHS	RoHS

Electro-Optical Specifications:

	XSW 320 CL Gated	XSW 320 GigE Gated	XSW 320 16bitDV Gated
Image format [pixels]	320 x 256	320 x 256	320 x 256
Pixel pitch [µm]	20	20	20
Detector type	InGaAs photodiode array with CTIA ROIC	InGaAs photodiode array with CTIA ROIC	InGaAs photodiode array with CTIA ROIC
Sensor temperature stabilization	TE cooler	TE cooler	TE cooler
Integration type	Snapshot - global shutter	Snapshot - global shutter	Snapshot - global shutter
Active area and diagonal [mm]	6.4 x 5.12 [diagonal 8.2]	6.4 x 5.12 [diagonal 8.2]	6.4 x 5.12 [diagonal 8.2]
Optical fill factor	100%	100%	100%
Spectral range [nm]	900 - 1700	900 - 1700	900 - 1700
Quantum efficiency	~80% [typical peak value]	~80% [typical peak value]	~80% [typical peak value]
Gain modes	Single Gain	Single Gain	Single Gain
Full well capacities [electrons]	70k	70k	70k
Read noise [electrons]	110	110	110
Dark current [electrons/second]	<100k [at 288K sensor temp and 150mV reverse bias]	<100k [at 288K sensor temp and 150mV reverse bias]	<100k [at 288K sensor temp and 150mV reverse bias]
Read out mode	ITR	ITR	ITR
Pixel operability	>99%	>99%	>99%
Preconfigured exposure time range [ms]	0.0001 to 40	0.0001 to 40	0.0001 to 40
Max frame rate [Hz] (full frame)	400	400	400
Region of interest	Yes	Yes	Yes
Min region size [pixels]	32 x 4 [step 4 x 1]	32 x 4 [step 4 x 1]	32 x 4 [step 4 x 1]
Max frame rate [Hz] [min region size]	>10000	>10000	>10000
Analog-to-Digital (ADC) [bits]	14	14	14
Command and control	CameraLink	GigE Vision	QTE Samtec
Digital output format	CameraLink [16 bit]	GigE Vision [16 bit]	Digital Video [16 bit]
Trigger	In or out via SMA or in via CL-CC1 [Configurable]	In or out via SMA [Configurable]	In or out via QTE Samtec [Configurable]