Product Catalog
The Swivellink® product was originally designed to provide an ergonomic and robust way to put operator start buttons onto custom built industrial machinery.
Fits: Sony XC56, Basler ACA640-90GM, Basler
ACA1300-60GM, and Basler ACA2500-14GM.
Mounts to AFSB-2XS, AFSB-2XS90, or AFSB-2-2XS
Fits: Dalsa Genie M1600, Dalsa TS-M1920, TSC4096, BOA BVS-0640, and A-CAM-GM 1600-00. Mounts to AFSB-1XS
If your camera has a 1/4-20 tripod mount, you can simply thread on the XS series stem and mount your camera. Mounts to AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS.
Our most versatile in the vision series. Fits: BANNER 70mm area light, Presence plus camera mounts: COGNEX Checker 100, Dataman 100/200, Insight 5000 (5100, 5100C, 5401, 5400C, 5403, 5400, 5605), DVT Legend 500, DALSA, BOA, KEYENCE IV-500/150/2000 Vision sensors. Mounts to AFSB-1 and AFSB-1XS.
The heavy duty ball link is used with the heavy duty knuckle to extend the reach and increase flexiblity. The link is 6” long and both of the ball ends have a knurled ring around it to improve the rigidity of the knuckle connection.The link is hollow for the continuation of routing wires, cables, or small hoses.
This heavy duty knuckle uses a double socket configuration to clamp the ball on a heavy duty base or heavy duty link. The heavy duty knuckle has (2) 3/8-16 screws and hex nuts on one side and a 1/2-13 clamp handle on the other side for quick adjustments. The design allows for a large range of motion while maintaining the internal hose and cable routing capability
The heavy duty ball base has a hole pattern to fit most standard T-slot aluminum extrusions. The through hole can be used for routing wires, cables, or small hoses. The ball has a knurled ring around it to improve the rigidity of the knuckle connection.
The Tee Link, when used with a Tee Knuckle gripped on the center ball, creates two separate branches. The hole in the center ball allows cable and hose routing for each branch.
Links are used with knuckles to extend the reach and increase the flexibility. This is a 4” link for longer applications. Links are hollow to continue the cable routing ability.
Links are used with knuckles to extend reach and increase flexibility. This is a 2” link for shorter applications. Links are hollow to continue the cable routing ability
The Tee Knuckle was designed to work with a Tee Link to create two branches from one base. These knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.
The knuckle uses a double socket configuration to clamp to the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability.
The ball base has 2 holes for ease of mounting. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove on the side of the base for cables, hose, and wires.
The Tee Link, when used with a Tee Knuckle gripped on the center ball, creates two separate branches. The hole in the center ball allows cable and hose routing for each branch
Links are used with knuckles to extend the reach and increase the flexibility. Standard series are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. Links are hollow to continue the cable routing ability. Example: AFSB-3-6 would be a 6” link
This product is a ball only that can be used with a 1/2” NPT threaded pipe to acquire any length necessary. The ball size fits our standard series.
The Tee Knuckle was designed to work with a Tee Link to create two branches from one base. These knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.
The knuckle uses a double socket configuration to clamp the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing capability.
The ball base has a hole pattern to fit most standard T-slot aluminum extrusions. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires.
This adaptor plate mounts to the robot and to aluminum 1.5” and 1.0” series extrusions either vertically or horizontally. This plate can also mount (2)
or (4) AFSB-1000-10-V vacuum arms directly onto
the plate instead of using the aluminum extrusion.
This kit is ready to add a robot mounting plate and vacuum cups to create a 4 arm vacuum gripper. Includes (4) AFSB-1000-10-V gripper arms, Aluminum Extrusion, and bottom cap. Robot mounting plate must be ordered separately. Does not include Vacuum cups.
This kit adds a knuckle and a ball base to the AFSB-10-V for a great start to building your vacuum gripper. By adding links and knuckles, this kit can be extended to fit most any need. Includes (1) AFSB-10-V Vacuum Kit, (1) AFSB-1 base, (1) AFSB-2 knuckle.
This kit includes everything needed to add vacuum to our standard series products. Directly thread in any vacuum cup with a G1/2 fitting or use one of the included adaptors for G3/8 or G1/4 fittings. The supply hose routes back through the knuckles, links, and bases for a clean and reliable solution with no exposed hoses. We also include a special adaptor for mounting decentralized vacuum grippers that have an M8 stud. The side port allows the pressure supply to run internally and the only exposed hose is at the gripper.
This kit has a monitor mount for VESA 75mm and100mm. Includes (1) AFSB-9 Plate,(2) AFSB-1 Bases, (3) AFSB-2 knuckles,(2) AFSB-3-4” Links.
This kit has 2 AFSB-4 which have M30 threads for mounting start button or E-stop buttons. Includes (2) AFSB-4 Button Bases, (1) AFSB-1 Base, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-2 knuckles.
This kit is the base Tee Link kit ready for Additions. This kit includes (1) AFSB-1 base, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-2 knuckles.
This kit has an AFSB-7 with a 30mm thread for mounting stack lights for status. Includes (1) AFSB-7 Sensor Mount, (1) AFSB-1 Base, (1) AFSB-2 knuckle.
This kit has a M30 thread for mounting start or E-stop button. Includes (1) AFSB-4 Button Base, (1) AFSB-1 Base, (1) AFSB-2 knuckle.
This kit has a mounting screw for any camera that has a 1/4-20 standard tripod mount. Also includes a Tee Link to add a light or additional camera. Includes (1) AFSB-5XS ball stem, (2) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-2XS 2” links, (1) AFSB-3XST tee link.
This kit has a mounting plate for the BANNER 70mm area light, Presence plus camera mounts: COGNEX Checker 100, Dataman 100/200, Insight 5000 (5100, 5100C,5401, 5400C, 5403, 5400, 5605), DVT Legend 500, DALSA, BOA, KEYENCE IV500/150/2000 Vision sensors. Includes (1) AFSB-5 plate, (3) AFSB-1 bases, (1) AFSB-290 tee knuckle, (4) AFSB-2 knuckles, (1) AFSB-3T tee link, (2) AFSB3-4 4” links.
This kit has a mounting plate for the Sony XC-56 camera along with a Tee Link to add a light or additional camera. Includes (1) AFSB-510XS-S-XC56 plate (2) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-2XS 2” links (1) AFSB-3XST tee link.
This kit has a mounting screw for any camera that has a 1/4-20 standard tripod mount. Includes (1) AFSB-5XS ball stem, (1) AFSB-1XS base, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has a mounting plate for the BANNER 70mm area light, Presence plus camera mounts: COGNEX Checker 100, Dataman 100/200, Insight 5000 (5100, 5100C,5401, 5400C, 5403, 5400, 5605), DVT Legend 500, DALSA, BOA, KEYENCE IV500/150/2000 Vision sensors. Includes (1) AFSB-5 plate, (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-4 4” link.
This kit has a mounting plate for the Sony XC-56 camera. Includes (1) AFSB-510XS-S-XC56 plate, (1) AFSB-1XS base, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has a mounting plate for the SICK Lector 62X series along with a Tee Link to add a light or additional camera. Includes (1) AFSB-515XS-S-ICR620 plate, (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-2XS 2” links, (1) AFSB-3XST tee link.
This kit has a mounting plate for the Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes a tee link to add a light or additional camera. Includes (1) AFSB-550-K-CVIV plate, (3) AFSB-1 bases, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (4) AFSB-2 knuckles, (2) AFSB-3-4 4” links.
This kit has a mounting plate for the Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV 2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes a Tee Link to add a light or additional camera. Includes (1) AFSB-550-K-CVIV plate, (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (1) AFSB-3XST tee link, (2) AFSB-3-4XS 4” links.
This kit has a mounting plate for the SICK Lector 62X series. Includes (1) AFSB-515XS-S-ICR620 plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has a mounting plate for the Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes (1) AFSB-550-K-CVIV plate, (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-4 4” link.
This kit has a mounting plate for the Keyence CV035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV 2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes (1) AFSB-550-K-CVIV plate, (2) AFSB-1XS bases, (2) AFSB-2XS knuckles, (1) AFSB-3-4XS 4” link.
This kit has a mounting plate for the Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV 2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes a Tee Link to add a light or additional camera. Includes (1) AFSB-550-K-CVIV plate, (3) AFSB-1 bases, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (4) AFSB-2 knuckles, (2) AFSB-3-2 2” links.
This kit has a mounting plate for the Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV 2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes a Tee Link to add a light or additional camera. Includes (1) AFSB-550-K-CVIV plate, (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (1) AFSB-3XST tee link, (2) AFSB-3-2XS 2” links.
This kit has a mounting plate for the Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV 2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes (1) AFSB-550-K-CVIV plate, (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-2 2” link.
This kit has a mounting plate for the Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV 2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes (1) AFSB-550-K-CVIV plate, (2) AFSB-1XS bases, (2) AFSB-2XS knuckles, (1) AFSB-3-2XS 2” links.
This kit has a mounting plate for the IFM O2V100 series, O2D220 Series, O3D200/201, and O1D100 series. Includes (1) AFSB-540-IFM plate, (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-4 4” link.
This kit has a mounting plate for the Datalogic A20, M1XX without bracket, M1/M2/M3XXT series brackets with metric and standard holes, and M2XX/M3XX/T series without bracket. Includes a Tee Link to add a light or additional camera. Includes (1) AFSB-560-D-AMT plate, (3) AFSB-1 bases, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (4) AFSB-2 knuckles, (2) AFSB-3-4 4” links.
This kit has a mounting plate for the Dalsa Genie M1600, TS-C4096, TS-M1920, A-CAM-GM1600-00 and Boa BVS-0640 along with a Tee Link to add a light or additional camera. Includes (1) AFSB500XS-D-GB plate, (3) AFSB-1XS bases, (5) AFSB2XS90 tee knuckles, (2) AFSB-3-4XS 4” links, (1) AFSB-3XST tee Link.
This kit has a mounting plate for the Dalsa Genie M1600, TS-C4096, TS-M1920, A-CAM-GM1600-00 and Boa BVS-0640 along with a Tee Link to add a light or additional camera. Includes (1) AFSB-500XS-D-GB plate (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-2XS 2” link (1) AFSB-3XST tee Link.
This kit has a mounting plate for the Datalogic A20, M1XX without bracket, M1/M2/M3XXT series brackets with metric and standard holes, and M2XX/M3XX/T series without bracket. Includes (1) AFSB-560-D-AMT plate, (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-4 4” link.
This kit has a mounting plate for the Dalsa Genie M1600, TS-C4096, TS-M1920, A-CAM-GM1600-00 and Boa BVS-0640. Includes (1) AFSB-500XS-D-GB plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-4XS 4” link.
This kit has a mounting plate for the Dalsa Genie M1600, TS-C4096, TS-M1920, A-CAMGM1600-00 and Boa BVS-0640. Includes (1) AFSB-500XS-D-GB plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has a mounting plate for the Cognex Dataman 100/200/500, Insight Micro, 4G, 4GX, and Checker 200. Also Includes a Tee link to add a light or additional camera. Includes (1) AFSB-520XS-CDMIC plate, (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-4XS 4” link (1) AFSB-3XST tee link.
This kit has a mounting plate for the Cognex Dataman 100/200/500, Insight Micro, 4G, 4GX, and Checker 200. Also includes a Tee link to add a light or additional camera. Includes (1) AFSB-520XS-CDMIC plate (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-2XS 2” link (1) AFSB-3XST tee Link.
This kit has a mounting plate for the Cognex Dataman 50 and Dataman 60 series along with a Tee Link to add a light or additional camera. Includes (1) AFSB-522XS-C-DM5060 adaptor ball mount, (2) AFSB -1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-4XS 4” links, (1) AFSB-3XST tee link.
This kit has a mounting plate for the Cognex Dataman 100/200/500, Insight Micro, 4G, 4GX, and Checker 200. Includes (1) AFSB-520XS-C-DMIC plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-4XS 4” link.
This kit has the mounting plate for the Cognex Dataman 100/200/500, Insight Micro, 4G, 4GX, and Checker 200. Includes (1) AFSB-520XS-C-DMIC plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has a mounting plate for the Cognex Dataman 50 and Dataman 60 series. Includes (1) AFSB-522XS-C-DM5060 adaptor ball mount, (1) AFSB-1XS base, (2) AFSB-2XS knuckles, (1) AFSB-3-4XS 4” link.
This kit has a mounting plate for the Cognex Dataman 50 and Dataman 60 series along with a Tee Link to add a light or additional camera. Includes (1) AFSB-522XS-C-DM5060 adaptor ball mount, (2) AFSB -1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-2XS 2” links, (1) AFSB-3XST tee link.
This kit has the mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series.
Also includes a Tee link to add a light or additional camera. Includes (1) AFSB-521-C-DI plate, (3) AFSB1 bases, (1) AFSB-290 tee knuckle, (1) AFSB-3T Tee Link, (4) AFSB-2 knuckles, (2) AFSB-3-4 4” Links.
This kit has a mounting plate for the Cognex Dataman 300 and the Cognex insight 7000 series. Also includes a Tee link to add a light or additional camera. Includes (1) AFSB-521-C-DI plate, (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (1) AFSB-3XST tee link, (2) AFSB-3-4XS 4” links
This kit has a mounting plate for the Cognex Dataman 50 and Dataman 60 series. Includes (1) AFSB-522XS-C-DM5060 adaptor ball mount, (1) AFSB-1XS base, (2) AFSB-2XS knuckles, (1) AFSB-3- 2XS 2” link.
This kit has the mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series. Includes (1) AFSB-521-C-DI plate, (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-4 4” Link.
This kit has a mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series. Includes (1) AFSB-521-C-DI plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-4XS 4” link.
This kit has the mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series. Also includes a Tee link to add a light or additional camera. Includes (1) AFSB-521-C-DI plate, (3) AFSB1 bases, (1) AFSB-290 knuckle, (1) AFSB-3T Tee Link, (4) AFSB-2 knuckles, (2) AFSB-3-2 2” Links.
This kit has a mounting plate for the Cognex Dataman 300 and the Cognex insight 7000 series. Also includes a Tee link to add a light or additional camera. Includes (1) AFSB-521-C-DI plate, (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (1) AFSB-3XST tee link, (2) AFSB-3-2XS 2” links.
This kit has a mounting plate for Baumer sensors CS100, ID100, ID110, XC100, XC200, XF100, and XF200. Also includes Tee link to add a light or additional camera. Includes (1) AFSB-580-B-VS plate, (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-4XS 4” links, (1) AFSB-3XST tee link.
This kit has a mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series. Includes (1) AFSB-521-C-DI plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has the mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series. Includes (1) AFSB-521-C-DI plate, (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-2 2” Link
This kit has a mounting plate for Baumer sensors CS100, ID100, ID110, XC100, XC200, XF100, and XF200. Includes (1) AFSB-580-B-VS plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-4XS 4” link.
The 5/32 T-Handle wrench is use for the screws in all of the knuckles in both the standard series and XS series (AFSB-2, AFSB-290, AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS) as well as the AFSB-1XS Ball Base mounting to the XS series mounting plates.
The 3/16 T-Handle wrench is used on the standard series to mount the AFSB-1 Ball Base to all of the standard series plates.
This dual arm Standard Series kit with 12” links is ready to mount any standard series mounting plate. This kit includes: (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-12 links, and (2) AFSB-Clamp Handles.
The AFSB-CLAMP HANDLE kit can be used in the standard and XS series knuckles (AFSB-2, AFSB290, AFSB-2XS, AFSB-2XS90, and the AFSB-2-2XS coupler) to make quick adjustments in the positioning of the arms. Remove one of the screws of the knuckle and add the spacer and handle. Once the position is set, tighten the remaining screws. The handle and spacer can then be removed and the original screw can be re-inserted, or the handle can be left on the knuckle.
This single arm Standard Series kit with a 12” link is ready to mount any standard series mounting plate. This kit includes: (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-12 link, and (1) AFSB-Clamp Handle.
This dual arm Standard Series kit with 8” links is ready to mount any standard series mounting plate. This kit includes: (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-8 links, and (2) AFSB-Clamp Handles
This dual arm Standard Series kit with 6” links is ready to mount any standard series mounting plate. This kit includes: (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-6 links, and (2) AFSB-Clamp Handles.
This dual arm Standard Series kit with 4” links is ready to mount any standard series mounting plate. This kit includes: (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-4 links, and (2) AFSB-Clamp Handles.
This single arm Standard Series kit with an 8” link is ready to mount any standard series mounting plate. This kit includes: (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-8 link, and (1) AFSB-Clamp Handle.
This single arm Standard Series kit with a 6” link is ready to mount any standard series mounting
plate. This kit includes: (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-6 link, and (1) AFSB-Clamp Handle.
This single arm Standard Series kit with a 4” link is ready to mount any standard series mounting plate. This kit includes: (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-4 link, and (1) AFSB-Clamp Handle.
This dual arm Standard Series kit with 2” links is ready to mount any standard series mounting plate. This kit includes: (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-2 links, and (2) AFSB-Clamp Handles.
This dual arm XS kit with 4” links is ready to mount any XS series mounting plate. This kit includes: (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (1) AFSB-3XST tee link, (2) AFSB-3-4XS link, and (2) AFSB-Clamp Handles.
This dual arm XS kit with 2” links is ready to mount any XS series mounting plate. This kit includes: (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (1) AFSB-3XST tee link, (2) AFSB-3-2XS link, and (2) AFSB-Clamp Handles.
This single arm Standard Series kit with a 2” link is ready to mount any standard series mounting plate. This kit includes: (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-2 link, and (1) AFSB-Clamp Handle.
This single arm XS kit with a 4” link is ready to mount any XS series mounting plate. This kit includes: (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-4XS link, and (1) AFSB-Clamp Handle.
This single arm XS kit with a 2” link is ready to mount any XS series mounting plate. This kit includes: (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS link, and (1) AFSB-Clamp Handle.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
