Home / 01. INDUSTRIAL CAMERAS / The Imaging Source – USB 3.0 Polarsens

The Imaging Source USB 3.0 Oolarsens DYK 33UX250

The Imaging Source – USB 3.0 Polarsens

Name: The Imaging Source - USB 3.0 Polarsens
SKU: 2772
Availability: InStock

Features:

● Resolution: VGA to 5 MP
● Frame rate: Up to 75 fps
● Dimensions: 29 x 29 x 43mm
● Sony Polarsens sensors: color and monochrome
● Four-directional, on-chip polarization
● Free software for camera control

The Imaging Source Datasheet

Add to Proposal

This product is already in your proposal request list.

Browse List

Product code	Format	Sensor	Chroma	Trigger	I/Os	Sensor type	Shutter
DYK 33UX250	²/₃ inch	IMX250MYR	Color	✔	✔	CMOS Pregius Polarsens	global
DZK 33UX250	²/₃ inch	IMX250MZR	Mono	✔	✔	CMOS Pregius Polarsens	global

Related Products

SVS-VISTEK SWIR

SVS-Vistek SWIR cameras incorporate Sony SenSWIR technology and the proven EXO and FXO camera platforms. Thanks to their wide spectral range and high sensitivity, SVS-Vistek SWIR cameras combine the benefits of an extremely compact footprint with a range from 400nm VIS to the SWIR range at 1700nm. With an innovative thermal design, users can have outstanding optical quality and dynamic range results, potentially using a single camera for multiple areas of the light spectrum.

Sony SenSWIR sensor with 400 – 1700 nm spectral sensitivity and high quantum efficiency
Advanced Two-Point NUC (Non Uniformity Correction)
CoaXpress-12 delivers lowest latency and highest speed
10GigE for economical bandwidth and ease of integration
LUT, Binning, ROI, Burst Mode
Up to 60°C (140°F) operating temperature
Industrial TTL-24V I/O interface with SafeTrigger, logic functions, programmable sequencers and timers, RS232 interface, electrical and optical inputs, GenICam and GenTL

SVS-VISTEK FXO CoaXPress

The FXO stands for excellent image quality. The fast CoaXPress-12 interface gives the camera outstanding properties in terms of trigger latency and constant data rate.

An excellent, low-noise image with high dynamics is complemented by a comprehensive feature set. The Sony Pregius S sensors used are characterized by high light sensitivity and best homogeneity. Signal voltages, temperature resistance, I/O control, integrated strobe controller and firmware features are geared towards applications in demanding industrial automation.

Technical highlights:

Sony Pregius S sensor, low-noise electronics
GenICam 3.0 software interface
CoaXPress-12 single lane
LUT, binning, ROI
Electrical and optical inputs
Up to 60°C operating temperature
Integrated 4-channel strobe controller
Industrial TTL-24V I/O interface with SafeTrigger, logic functions, programmable sequencers and timers, RS232 interface

ISVI IC-X12RZ-CX1

The RAZOR series cameras incorporate the most popular sensor resolutions with the ultimate in image performance, frame rates and economy. With scalable 1, 2 or 4 output links, RAZOR cameras offer users an easy and very cost-effective upgrade path to existing Camera Link systems.

Key Features:

High-Resolution Sensors
12 Mega Pixel
Global Shutter CMOS
High-Speed FrameRates181fps, 124fps,72fps, 81fpsCoaXPress CXP6Monochrome, NIR*& Color Automatic FFC& DPCcorrection8/10*-bit Output Resolution

SVS-VISTEK HR Camera Link

Camera Link offers high data rates, deterministic timing and very direct access to the image sensor. Our high resolution industrial cameras with Camera Link provide a wide range of core features:

14 bit CCD AD converter, 8 or 12 bit transmission
Tap balancing
User defined defect pixel correction
LUT, gamma, offset
ROI, binning (not for: hr49, hr65)
Power over Camera Link (PoCL)
Integrated multi channel LED strobe controller
Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencers and timers, RS232

Camera Link permits settings and operating modes that are not available with other interfaces:

Pixel clock setting for CCD sensors
4 x 4 binning for CCD sensors
Particle image velocimetry on some CCD sensors
Power over Camera Link (PoCL)