The ODR80 EZ Mount Ring Light Series is an all-around durable light that operates in OverDrive^™ strobe mode. Its simple plug-and-play 5-pin M12 connector is easy to use. The 1-10VDC intensity control gives users full control over light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.

The ODRD130 EZ Mount Ring Light Series features a factory installed diffused lens cover and is an all-around durable light. It features an OverDrive^™ strobe driver with NPN or PNP signal trigger inputs. Its simple plug-and-play 5-pin M12 connector is easy to use. The 10%-100% intensity control gives users full control over light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.

The ODRL300 Large Ring Light Series is designed to produce a homogeneous, uniform light pattern for larger applications and longer working distances. This light operates in OverDrive^™ strobe mode. The ODRL300 runs on an industry-standard 24VDC. The 1-10VDC analog control line gives the user total control over intensity. Proper heat dissipation is achieved using the side extrusion. The 45 mm extrusion makes mounting the light easy when using drop-in T-nuts. The 5-pin M12 connector makes wiring to the light simple.

The ODS75 Brick Light Series features a smart driver with OverDrive^™ strobe mode. The high-intensity LEDs provide an intense but diffused light pattern at a working distance of up to 4000 mm. This series of lights offers a manual potentiometer intensity control allowing the intensity to be adjusted from 10%-100%. A user can also adjust the intensity using the 1-10VDC analog signal line. Heat is dissipated through the aluminum back plate, which allows the ODS75 Series to be run at a higher current and hence greater intensity.

The ODSX30 (N4) Series of Prox Lights feature a single high current LED enclosed in a 30 mm Barrel Style Housing. This light is designed for Overdrive^™ strobe mode only. The ODSX30 (N4) Series feature an NPN and PNP strobe signal with a 1-10VDC analog intensity control signal for added versatility. The ODSX30 (N4) Series has multiple mounting options allowing for ease of install and comes with two mounting nuts. The narrow, 4-degree lens allows for a long, tightly focused beam of light.

The ODSX30 Prox Light Series operates in OverDrive^™ strobe mode. The housings are industry-standard threaded-barrel M30 x 1.5 style used for proximity and photoelectric sensors. The Prox Light Series includes an integrated built-in driver – no external driver needed. The ODSX30 Series feature an NPN and PNP trigger input signal with a 1-10VDC analog signal line for added versatility. The ODSX30 Prox Light has multiple mounting options allowing for ease of install and comes with two mounting nuts.

The ODSXP30 Series Projector Light offers a homogeneous light pattern. This light is designed for Overdrive^™ strobe mode only and offers NPN or PNP trigger signal input. The 9 mm² die emits five times the intensity of a constant current SXP30. The housing is constructed of finned 6061-T6 aluminum and designed to dissipate as much heat as possible, therefore allowing the LED to be run at a much higher current than the standard 1 mm² die LEDs. Multiple interchangeable pattern styles are available along with optional custom patterns.

The ODSXW30 Prox Light Series of spot lights features a stainless-steel enclosure for applications in washdown environments. This light operates in OverDrive^™ strobe mode. The ODSXW30 features an integrated constant current driver built into the light and runs in continuous operation mode. NPN or PNP trigger signals can be used to control the on/off input of the light. The intensity of the light can be controlled via 1-10VDC analog signal line or the manual potentiometer.