The ODSXP30 Series Projector Light offers a homogeneous light pattern. This light is designed for Overdrive^™ strobe mode only and offers NPN or PNP trigger signal input. The 9 mm² die emits five times the intensity of a constant current SXP30. The housing is constructed of finned 6061-T6 aluminum and designed to dissipate as much heat as possible, therefore allowing the LED to be run at a much higher current than the standard 1 mm² die LEDs. Multiple interchangeable pattern styles are available along with optional custom patterns.

The ODSXW30 Prox Light Series of spot lights features a stainless-steel enclosure for applications in washdown environments. This light operates in OverDrive^™ strobe mode. The ODSXW30 features an integrated constant current driver built into the light and runs in continuous operation mode. NPN or PNP trigger signals can be used to control the on/off input of the light. The intensity of the light can be controlled via 1-10VDC analog signal line or the manual potentiometer.

The RC130 EZ Mount Ring Light Series was designed to produce a large uniform/homogeneous light pattern. To achieve this, the RC130 contains special lenses for creating this near collimated light pattern. Its simple plug and play 5-pin M12 connector is easy to use, while allowing for full control. The RC130 operates with either an NPN or a PNP trigger signal input and runs on an industry-standard 24VDC. The 10%-100% intensity control assists in gaining full control of the light’s output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.

The RCC130 EZ Mount Ring Light contains special lenses to produce a narrow uniform/homogeneous light pattern. Its simple plug-and-play 5-pin M12 connector is easy to use. The RCC130 operates with either an NPN or a PNP signal and runs on an industry-standard 24VDC. The 10%-100% intensity control gives users full control over light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.

The RHI200-DO is an OverDrive^TM only light source meant to provide external illumination for logistics. The RHI200-DO is a high intensity ring light that can be used with long working distances and features optional mounting brackets for most major machine vision cameras.

Get more light with less power with exceptional energy management

Our specially designed onboard charging capacitors ensure powerful bursts of energy with a low consistent electrical draw.

The Lightgistics Series: Brighter. Faster. Better. 

The RHI200-DO is part of the Lightgistics Series – machine vision lights made for the logistics industry.

Product highlights

• Dual OverDrive features Deca OverDrive with 10x standard light output
• Direct connect and control through camera’s trigger output
• Built for high speed conveyor systems
• Compatible with most common major machine vision cameras
• Designed for use with a polarizer

The RL200 Large Ring Light Series is designed to produce a homogeneous, uniform light pattern for larger applications and longer working distances. The RL200 runs on an industry-standard 24VDC. The 1-10VDC analog control line gives the user total control over intensity. Proper heat dissipation is achieved using the side extrusion. The 45 mm extrusion makes mounting the light easy when using drop-in T-nuts. The 5-pin M12 connector makes wiring to the light simple.

The compact and powerful RM140-4Z Mini Ring Light is a low-angle ring light that works best for dark field ring applications. The light can also be used for radial illumination. The RM140-4Z series features an aluminum housing and is IP65 rated. The RM140-4Z has four zones, making it a quadrant light in which each individual zone can be controlled independently of each other. The 4ZMD-250 is an external driver that permits control of up to four separate light zones either independently or simultaneously, in any combination. The 4ZMD has independent intensity controls and built-in Multi-Drive^™, allowing for a range to be set from 10%-100% for continuous operations or OverDrive^™ strobe mode. The RM140-4Z KIT includes a RM140-4Z mini ring light and a 4ZMD-250 external driver.

The RM75 Series of mini ring lights is compact, yet produces a homogeneous, uniform light pattern. The RM75 features an integrated Multi-Drive^™ constant current driver that operates in continuous operation or OverDrive^™ strobe mode depending on wiring configuration. The light also offers overcurrent protection and PNP and NPN trigger signal input. The industry-standard 5-pin M12 connector makes for simple wiring.