Product Catalog
Showing 321–336 of 586 results
Camera Link offers high data rates, deterministic timing and very direct access to the image sensor. Our high resolution industrial cameras with Camera Link provide a wide range of core features:
Camera Link permits settings and operating modes that are not available with other interfaces:
The interface standard CoaXPress was developed to meet the need for higher bandwidth generated by recently launched sensors. SVS-Vistek is providing CoaXPress cameras with 4 CXP-6 lines. Thus, the CXP data interface is providing 25 GBit/s.
The HR series with CoaXPress is focusing on latest CMOS sensors with highest resolutions. Excellent thermal design and electronics provide superb image quality and low (structured) noise. The HR is a high end industrial camera packed with features:
Polarized cameras are equipped with special image sensors and measure the polarization properties of light that are imperceptible to the human eye. The degree of polarization and the planes of polarization can be determined from a single image. Global shutter, high resolution, high optical dynamic range and high frame rate allow detailed structural analysis of even moving objects.
Despite the special sensors, the EXO Polarized is a standard industrial camera for use with standard lenses. The integrated 4-channel strobe controller supports complex lighting and analysis setups.
The SHR features low-noise half-frame CCD and CMOS images sensors with large pixels in a class of its own. State-of-the-art tap sensor balancing and user defined fixed pattern noise reduction guarantee outstanding image quality. The highest structural precision of the sensor adjustment in a massive housing make the SHR with its lens shading correction the ideal partner for the most demanding optical applications.
CoaXPress specific features
CoaXPress currently is the fastest standardized industrial solution for long-distance industrial cameras with thin cables. The industrial camera I/O interface facilitates integration.
SVS-Vistek SWIR cameras incorporate Sony SenSWIR technology and the proven EXO and FXO camera platforms. Thanks to their wide spectral range and high sensitivity, SVS-Vistek SWIR cameras combine the benefits of an extremely compact footprint with a range from 400nm VIS to the SWIR range at 1700nm. With an innovative thermal design, users can have outstanding optical quality and dynamic range results, potentially using a single camera for multiple areas of the light spectrum.
Our ultraviolet cameras are based on the proven design of the FXO series. The fast CoaXPress-12 interface provides outstanding performance in terms of ultra-low trigger latency, faster frame rate and constant data rate. The 10GigE interface option is an economical, highly stable alternative with advantages for long data lines up to 100m. Sony Pregius UV sensors combine high resolution, high dynamic range and superior sensitivity in the wavelength range of 200 – 400 nm.
Our ultraviolet cameras are optimized for deployment in industrial automation processes thanks to advanced signal voltages, temperature stability, I/O control, integrated strobe controller, and feature-rich firmware.
Technical highlights:
Conveyor Bearing Block attaches to the extrusion body and holds the bearing used for the rollers on the conveyor. Block includes the bearing, T nut, and fasteners. The bearing fits the ½” diameter shaft of the rollers. Designed for easy bearing replacement when needed. The block has a boss to position and guide the block onto the extrusion fastener slot.
Tension Block – Use this block at the idle roller end to give precise belt tension adjustment. Use this in conjunction with the AFC-1 bearing blocks. This block attaches into the extrusion T slot with included fasteners. The included tension adjustment screw can be turned with a standard open end wrench.
Conveyor Kit includes everything you would need to build a conveyor except the motor, extrusion, and conveyor belt. This kit gets you a drive kit, bearing blocks, tensioners, rollers, and stands. Includes (3) AFC-1, (2) AFC-10, (1) AFC-20-DK, (2) AFC-14V-X.X, and (quantity) AFC-7-SKF. Reference the web site for information on configuring your custom kit application.
Conveyor rollers are available for 1.5”, 3.0”, and 4.5” frame widths. Roller can be used for a drive or idle roller. Rollers feature a standard 6mm centered V belt driver for both drive and belt tracking. This V belt groove aligns with the T slot in the extrusion so that the belting material is guided the entire length of the conveyor.
Roller Pulley is used on the drive roller of the conveyor. Set screw lock to the roller shaft. Belt drive is with a 5mm pitch timing belt drive for no slip applications.
Motor Pulley is used on the drive motor of the conveyor. Made to fit the ¾” motor shaft. Set screw lock to the motor shaft. Belt drive is with a 5mm pitch timing belt drive for no slip applications.
Under drive motor plate is used to mount the drive motor to the side of the conveyor body extrusion. Plate attaches with included T-nut plate and fasteners. Boss locates the plate into the extrusion T slot. Bearing included for the drive roller shaft. Mounting pattern for 90° gear motor. Should not be used without the AFC-21 Under drive belt cover.
Drive Kit includes all the parts needed to build the conveyor drive except the motor and roller. Includes (1) AFC-18, (1) AFC-19, (1) AFC-20, (1) AFC-21, and (1) AFC-22.
Under drive belt cover – use with the AFC-20 Under drive motor plate to enclose and protect the conveyor belt drive. Solid construction for protection of the drive in industrial use applications.
Timing belt 5mm pitch X 15mm wide timing belt used with the roller and drive pulley to transfer the gear motor drive to the conveyor roller.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942