Product Catalog
Showing 401–416 of 611 results
This kit has a mounting plate for the Cognex Dataman 100/200/500, Insight Micro, 4G, 4GX, and Checker 200. Also Includes a Tee link to add a light or additional camera. Includes (1) AFSB-520XS-CDMIC plate, (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (2) AFSB-3-4XS 4” link (1) AFSB-3XST tee link.
This kit has a mounting plate for the Dalsa Genie M1600, TS-C4096, TS-M1920, A-CAM-GM1600-00 and Boa BVS-0640 along with a Tee Link to add a light or additional camera. Includes (1) AFSB500XS-D-GB plate, (3) AFSB-1XS bases, (5) AFSB2XS90 tee knuckles, (2) AFSB-3-4XS 4” links, (1) AFSB-3XST tee Link.
This kit has a mounting plate for the Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV 2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes a Tee Link to add a light or additional camera. Includes (1) AFSB-550-K-CVIV plate, (3) AFSB-1XS bases, (5) AFSB-2XS90 tee knuckles, (1) AFSB-3XST tee link, (2) AFSB-3-4XS 4” links.
This dual arm Standard Series kit with 6” links is ready to mount any standard series mounting plate. This kit includes: (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-6 links, and (2) AFSB-Clamp Handles.
This dual arm Standard Series kit with 8” links is ready to mount any standard series mounting plate. This kit includes: (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-8 links, and (2) AFSB-Clamp Handles
This ball sleeve adaptor allows the 28.5MM ball to fit into the standard AFSB-2 knuckle or AFSB-290 tee knuckle and allow for a large range of motion. The ball sleeve adaptor consists of 2 halves that clamp over the 28.5MM ball to seat securely into the standard knuckle.
This ball adaptor allows the .75 (19mm) apple core adaptor to fit into the standard AFSB-2 knuckle or AFSB-290 tee knuckle and allow for a large range of motion. The ball adaptor clamps over the .75 dia (19mm) apple core to seat securely into the standard knuckle.
The heavy duty ball base has a hole pattern to fit most standard T-slot aluminum extrusions. The through hole can be used for routing wires, cables, or small hoses. The ball has a knurled ring around it to improve the rigidity of the knuckle connection.
The ball base has 2 holes for ease of mounting. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove on the side of the base for cables, hose, and wires.
The knuckle uses a double socket configuration to clamp the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing capability.
This coupler connects a standard size ball to an XS series ball. This is great for mixing and matching to meet your needs
The Tee Knuckle was designed to work with a Tee Link to create two branches from one base. These knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.
This heavy duty knuckle uses a double socket configuration to clamp the ball on a heavy duty base or heavy duty link. The heavy duty knuckle has (2) 3/8-16 screws and hex nuts on one side and a 1/2-13 clamp handle on the other side for quick adjustments. The design allows for a large range of motion while maintaining the internal hose and cable routing capability
The knuckle uses a double socket configuration to clamp to the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability.
The Tee Knuckle was designed to work with a Tee Link to create two branches from one base. These knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.
This product is a ball only that can be used with a 1/2” NPT threaded pipe to acquire any length necessary. The ball size fits our standard series.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
